Support Center

Programming speeds of device programmers

Last Updated: May 01, 2014 11:16AM PDT
The table below can be used as a reference for the programming speed of the 844USB.
Device Operation Mode Time
27C010 programming and verify ZIF 24 sec
AT29C040A programming and verify ZIF 32 sec
AM29F040 programming and verify ZIF 69 sec
PIC16C67 programming and verify ZIF 10 sec
PIC18F452 programming and verify ZIF 7 sec
AT89C52 programming and verify ZIF 17 sec
PIC16F876A programming and verify ISP 5 sec
PIC12C508 programming and verify ISP 3 sec

Test conditions: P4, 2,4GHz, USB 2.0 HS, Windows XP.
The table below can be used as a reference for the programming speed of the 866C.

 
Device Size [bits] Operation Time
H26M11002AAR (eMMC NAND Flash) 3C780000hx8 (8 Giga) programming *1 480 sec
K8P6415UQB (parallel NOR Flash) 400100Hx16 (64 Mega) programming and verify 13 sec
K9F1G08U0M (parallel NAND Flash) 8400000Hx8 (1 Giga) programming and verify 122.7 sec
QB25F640S33 (serial Flash) 800200Hx8 (64 Mega) programming and verify 30.7 sec
AT89C51RD2 (microcontroller) 10000Hx8 programming and verify 14.4 sec
PIC32MX360F512L (microcontroller) 80000Hx8 programming and verify 8.9 sec

Conditions: P4, 2.4GHz, 512MB RAM, USB2.0, Windows XP 
*1 implementation is the same as in card readers. Verification of programming is performs internal controller. Internal controller confirm the proper programming using status register. 
 
Test conditions: P4, 2.4GHz, 512MB RAM, USB2.0, Windows XP.
 
*1 Implementation is the same as in card readers. Verification of programming is performed by internal controller, where internal controller confirms the proper programming using status register.
178af1a33e8bb83a5155805675912147@bkprecision.desk-mail.com
https://cdn.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete