Support Center

Modulation schemes supported by B&K Precision generators

Last Updated: Oct 01, 2015 04:23PM PDT
Most signal generators have built-in modulation functions that are useful for evaluating communications, signaling, and control circuits. In electronics and telecommunications, modulation is a process that varies the properties of a periodic waveform called the carrier. The modulated signal can be used to convey speech, video, or data. Below is an overview of the modulation schemes supported by B&K’s generators.


 
Amplitude Modulation (AM and AM-DSB)
 
Figure 1 - Amplitude Modulation
 
In the frequency domain, amplitude modulation produces a signal with power concentrated at the carrier frequency and two adjacent sidebands. For example, the speech picked up by a microphone is used to modulate the carrier signal’s amplitude. Double-sideband amplitude modulation (AM-DSB) includes the upper and lower sideband components.
 
 
Frequency Modulation (FM)
This same speech from the microphone could also be used to modulate the carrier by keeping the amplitude of the signal constant and causing a deviation above and below the carrier frequency. This results in a method called FM or frequency modulation.
Figure 2 - Frequency Modulation
 
 
Phase Modulation (PM)
This scheme modulates the phase rather than the frequency of the carrier waveform to embed the content. In digital PM, the carrier phase shifts abruptly rather than continuously back and forth.
 
Figure 3 - Phase Modulation
 
Frequency-Shift Keying (FSK)
One of the early digital modulation types is frequency-shift keying (FSK). It is based on two states, which allow the signal to express binary data. The carrier switches between two frequencies: a center frequency and an offset frequency. 
 
In theory, FSK can be implemented by using completely independent free-running oscillators, and switching between them at the beginning of each symbol period.
 
                     
Figure 4-Encoding FSK
 
In most real world implementations, FSK modulation is produced using a Voltage Controlled Oscillator (VCO) or microprocessor.
 
Amplitude-Shift Keying (ASK)
This is a form of amplitude modulation that represents digital data as variations in the amplitude of a carrier wave. In an ASK system, the binary symbol 1 is represented by transmitting a fixed-amplitude carrier wave and fixed frequency for a bit duration of T seconds.

Figure 5 – Amplitude-Shift Keying Modulation
 
Pulse Width Modulation (PWM)
This modulation scheme is used in power supplies, dimmer circuits, and motor controls. The PWM circuit is integrated on many microcontrollers. In motor control, the modulation changes the duty cycle of the repeating pulse train to represent motor position, speed, and direction.
 
Figure 6 - Pulse Width Modulation
 
Most of the modulation schemes described in this article are considered scalar or analog type signals. More complex signaling systems will use vector and time-variant schemes. Advanced modulation schemes will require industry specific signal generators and analyzers.
178af1a33e8bb83a5155805675912147@bkprecision.desk-mail.com
https://cdn.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete